What a ledger panel is
A ledger panel is a set of natural stone strips bonded into one piece, so a wall goes up a panel at a time. The strips are split rather than sawn on the face, which gives the rough, layered texture of dry stacked stone and throws strong shadows in low sun.
Ours come in 6" x 24" panels, with matching 6" x 24" corner pieces for outside corners. One panel covers 144 square inches, which makes it exactly one square foot.
Where they work
- Fireplace surrounds and chimney breasts, indoors or out.
- Outdoor kitchens and barbecue islands.
- Accent walls in an entry, a living room or behind a bar.
- Columns, pillars and the base of a stucco wall.
- Raised planters and seat walls in the yard.
On a fireplace the stone itself will not burn, but the surround still has to keep the clearances the fireplace maker sets, so check those with your installer before you plan the wall.
Choosing a color
The cooler colors suit modern homes, gray or white stucco and black metal. Silver travertine mixes gray with cream, and Ice White is a bright white marble.


Silver
Travertine Ledger Panel


Ice White
Marble Ledger Panel
The warmer colors suit Tuscan, Spanish and territorial homes and sit naturally with terracotta tile and tan stucco.


Cordoba Cream
Travertine Ledger Panel


Noce
Travertine Ledger Panel


Scabos
Travertine Ledger Panel
If the wall sits next to a travertine patio or pool deck, matching the panel to the paver ties the two together. Noce and Silver both come as travertine pavers as well.
Panels and corners
Flat panels cover the face of the wall. Corner pieces wrap an outside corner, with a long leg on one face and a short leg on the other. Alternating them up the corner makes it read as solid stacked blocks instead of a cut edge with the panel ends showing.
Inside corners, where two walls meet and point away from you, do not need corner pieces. The flat panels butt into each other there.
Measuring a wall
- Measure the width and height of each wall face in feet and multiply them to get square feet. A wall 10 feet wide and 8 feet tall is 80 square feet.
- Subtract any openings the stone will not cover, such as the fireplace opening or a window.
- For corners, measure the height of every outside corner in inches and divide by 6, since each corner piece is 6 inches tall. An 8 foot corner is 96 inches, which is 16 corner pieces.
- Add extra for cuts. Many installers allow five to ten percent on the flat panels.
Ledger panels are sold by the box. Ask us for the coverage per box in the color you choose and we will turn your square footage into a box count.
Before it goes on the wall
Natural stone is heavy, so the wall behind it matters. Your installer will check what it needs on the wall you have. Outdoors, and on any wall near a grill, ask about sealing, since a sealer makes grease and water easier to clean off the stone.
Stone varies from lot to lot. Order the whole wall at once, and if you can, see the panels at our Phoenix or Mesa yard before you commit. Browse every color on our ledger panels page.




